The multimeter is supplied in a large colorful box. I’ll start as expected with the characteristics:
The fifth button is the continuity and diode test mode:
Though from a phone:
By the way, after 10 minutes of inactivity, the large display switches to the time display mode:
Therefore, it is not necessary to turn it off every time https://tonaton.com/s_38-portrait-paintings. But what they did did. When you first look at the device, the question arises: what are you? For example, I put the PeakMeter PM8232 tester next to it.
As for working in wireless speaker mode, here you can connect even from a PC:
As for the sound, here it is, let’s say, average .
Personally, I would like to see at least a MicroUSB connector here https://tonaton.com/c_birds. The multimeter itself inside the box is in a foam bed. This is how it looks with its legs raised: On the front side there is a display, mode switching buttons, ports for probes, and a knob with a built-in display that displays the temperature in the room, as well as the status of the column: There are no problems with damage during delivery. There are two rubber feet on the bottom, as well as two lifting feet, in order to slightly raise the front of the multimeter, for more convenient placement and reading of information: I just tried to talk about this interesting multimeter. The first two buttons are the measurement of DC and AC voltage modes:
There is a lid on the back, under which there are two
modes are highlighted as separate buttons. Measuring a 18650 battery: So you think for yourself. And as a column, the device, in my opinion, is not very good.
I also tried to set different voltages on the LBP on the DPS5020. Hello everyone.
The fourth button is the mode of measuring the capacitance of capacitors .
The readings are almost the same, considering that the PM8232 only displays two numbers after the decimal point. This function allows you to display the minimum and maximum values memorized during the measurement. The cords are not oak. Instruction in English. This is not a shame to give. This device is positioned as a repairman’s desktop device. I can say that the readings are quite enough for everyday measurement. The rest of the modes did not test in such detail.
Left and right there are fabric inserts covering the speakers: No, because the price tag is too high in my opinion. The sixth button is the DC current measurement mode The third button is the resistance measurement mode: Well, a small demonstration of work.
It works as a measuring device, but at the same time it can show time, room temperature and play music from any bluetooth source. I wish https://jiji.com.gh/25-dresses/shower you all a good mood and
The multimeter itself is a large plastic box. This is the whole review.
The probes in the kit are made of high quality. Can I recommend the device for purchase? Yes and no.
The package consists of the multimeter itself, probes, instructions and a MiniUSB charging cord (a strange decision in 2020) For sounding a small room, of course, it is enough.
The braid is soft silicone. I eventually spat and do not turn it off at all. Yes, because the device is really convenient and has good functionality as a multimeter. There is a disassembly and good detailed tests. There is another review on this multimeter on Musk. Sufficiently high quality and voluminous:
Today I have a small review of the BSIDE 19999 multimeter/column In idle mode, the battery is consumed very sparingly. I also recommend reading. By the way, the cord itself is not bad in quality:
But if you think about it well, then just like a desktop multimeter with additional functionality, this device is quite good and interesting. We look at the LBP screen and what the multimeters display: The seventh button this is the Hold button, it is used to freeze the displayed indicators on the display. Only the box was damaged: Desktop multimeter with built-in wireless speaker and thermometer
But depending on
and you have to reach every time to turn on / off the multimeter.